Forsiden > ESC & Accessories (Car) > ESC - Touring, Track & Drifting > G-Force - TS120 AMP (2S) Brushless ESC - (Competition-Alu edition)

Klikk for større bilde

G-Force - TS120 AMP (2S) Brushless ESC - (Competition-Alu edition)

  • På lager
  • Kr 1 549,00


    Beskrivelse

    - 2S TS 120 AMP Brushless ESC (Black Aluminium Edition)


    Features:

    • Users could set the turbo and boosting timing which can improve the motor RPM to get its best performance.

    • Well-performed throttle and brake control function could control the punch/brake rate by point and the point can be set by user. The precision of the punch/brake rate is 1. And the user could also custom the throttle/brake curve.

    • Punch control is reasonable and precise and can meet different customers' request for Line and power.

    • Red copper connector is used internal of the ESC. It can decrease the internal resistance at high current situation and the thermal resistance.

    • The circuit is managed by intelligent thermal management kernel algorithm which can improve driving skill and adjust the control time of the dead band. The dynamic loss can be reduced effectively when the motor is running at high speed or the user changes the motor speed frequently so that the motor can be more stable when running.

    • The internal resistance can be reduced by laminated copper stack control technology and cooling fan design (8V 0.2A 20000RPM) so that the dynamic thermal equilibrium can be got. In this case, the aluminum heat sinks can works effectively.

    • The electronic switch is built in so that it could save space. And the electronic switch is more sensitive and reliable.

    • The users could set and store 10 sets of profiles in the ESC. These data could be called out at any time without any special program setting. All the setting can be exported or imported so that the user could compare and analyze.

    • Safety features: low voltage protection, motor and ESC overheat protection and signal lost protection.

    • The firmware can be updated by connecting the ESC with PC or smart phone.

    • It can be off by keeping the trigger to full brake for 8 seconds when running.
       



    Included:

    • 12AWG cable (Black 1m)
    • Cooling Fan(8V 0.2A 20000RPM)
    • Large-capacity capacitor
    • Instruction manual

    Remember to order the Program Box


    Product Specifications:


    Constant/Burst Current 120A/760A 
    Motor Compatible Brushless Sensor & Sensorless ESC
    Car Compatible 1/10,1/12 all competitions
    1/10 and 1/8 Crawlers
    Motor Limits 4-6S NIMH or 2S LIPO--≥3.5T(1/10 on-road), ≥5.5T(1/10 off-road)
    7-9S NIMH or 3S LIPO--≥5.5T(1/10 on-road),≥8.5T(1/10 off-road)
    Resistansce  0.0003 ohm
    Battery Cell Count 4-9S NIMH or 2-3S LIPO
    BEC Output 6V@3A , linear
    Size  39x38x20mm (LxWxH) 
    Weight

    48g(w/o wire)

    FAN 8V@0.2A , MAX 12.6V 
    Direction of a Throttle
    • "Forward/Brake" "Forward/Reverse" "Forward/Brake/Reverse"
    • The shipment state becomes "Forward/Brake".
    • Optional PROGBOX is needed for changing a setup.